SerVision CVG-M Informacje Techniczne Pobierz pdf (Strona 41)

SerVision Embedded Video Gateway System Guide

Configuring System Settings 40

4. If the unit will have a static IP address, clear the Enable Dynamic IP (DHCP) checkbox. The fields required

to configure the LAN settings are added to the screen.

Figure 39: Static IP settings

Fill in the fields as follows:

 Field

 Description

IP Address

Specify the static IP address of the unit on the cabled LAN. The address should conform to

the standards of the LAN.

Subnet Mask

Modify the LAN subnet mask as necessary. The subnet mask should be the one the LAN

uses.

Default

Gateway

Fill in the IP address of the gateway through which the LAN connects to the internet.

If you do not know the IP address of the gateway, consult the network administrator or

your ISP.

Note: If this field is not filled in correctly, external network services will not be available

through this network. These include accessing the unit remotely (even through proxy and

DDNS services), SMS, e-mail notifications, and other services.

DNS

Fill in the IP address of the DNS server. A DNS server enables you to enter names instead

of IP addresses for the proxy and DDNS servers. The DNS server may be operated by your

internet provider (home installation) or on your network (some office installations).

If you do not know the IP address of the DNS server, consult the network administrator or

the ISP.

Note: If this field is not filled in correctly, you will not be able to specify IP addresses as

host names. For example, the address of the SMTP e-mail server will have to be defined as

IP numbers. In addition, DDNS will not perform updates if there is no valid DNS address.

5. Click Update and then save the settings. They will be implemented after the unit is restarted (see Saving

Configuration Changes, page 125).

Modem

The Modem screen is used to configure the way the unit connects to a cellular network. Modem support in models

that use SerVision routers (MVG and UVG) is slightly different from modem support in the CVG-M, which does

not have a router.

NOTE: If you use a cellular modem to make the Video Gateway accessible remotely, you may have to use a

SerVision proxy server to facilitate client connections to the unit. For additional information, see Proxy

and DDNS Settings, page 53.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 202 203

Brak uwag

SerVision CVG-M Informacje Techniczne Strona 41